About Us | Careers | History | News | Extranet | Contact Us | Home
  Assembly Adhesives
Epoxy & Urethane Adhesives
& Potting

Aerospace Sealants & Adhesives Adhesives & Coatings for Inflatable Structures Contact & Pressure Sensitive Adhesives Water-based Adhesives
& Coatings
Energy Cured Adhesives
& Coatings
Flooring Adhesives & Accessories Mirror
Mastics
Custom Packaging  
 
Markets Served
 
Extranet Sign-In
Username
Password

Extreme® Assembly Adhesives Product Details
Product: PVC TrimWelder - Slow Cure
PVC TrimWelder®

PVC TRIMWELDER™ SLOW CURE Adhesive is a slower curing, two-component adhesive formulated and colored for PVC Trim Board applications with a work life of 15 to 25 minutes at 70ş F after mixing. It is a creamy, medium viscosity, solvent-free structural adhesive that is EPA and CARB compliant. Cured performance shows excellent adhesion and bond strength. Adhesive joints are ready to handle in 90 to 120 minutes.

PVC TRIMWELDER™ SLOW CURE Adhesive does not require special surface preparation. It’s stronger then PVC after curing and fills gaps to 1/4”. SLOW CURE is designed for larger parts requiring additional assembly time or as a finishing material to create fillets and blends . The creamy consistency, won’t foam, run or drip Excellent sandability after curing. NOTE! For best structural core to core bonds we recommend PVC TRIMWELDER™ FAST CURE

Why Should You Select This Adhesive?

  • Permanent Unitizing Structural Adhesive
  • Excellent Adhesion to PVC
  • Impact Resistance - Peel Strength
  • Matches white PVC Trim Boards
  • Paintable
  • Fast Setting
  • Easy to apply
  • Fills Nail Holes and Gaps
  • Meets 2009 EPA VOC & CARB requirements

  • Work Time (Minutes): 20 to 25
  • Color: Bright White
  • Viscosity: Medium/ Creamy
  • Elongation: Moderate
  • Mix Ratio by Volume: 1:1

Packaging: 50ml, 220ml
ItemNumber: EXT-SC-50-ML, EXT-SC-220-ML

Tech Data »
MSDS »

Purchase »


 
Strength Begins Minutes
Tensile Shear Strength (AL)
Impact Strength (Steel)
Peel Strength
Service Temperature
Hardness
Best For
90 - 120
3300 psi
> 20 ft/lbs
25 pli
-65 F to +260 F
75 Shore D
PVC, Thermo- Plastics, Composites, Metals
             

Under no circumstance will Royal Adhesives & Sealants LLC. or its subsidiaries, the manufacturer, or the seller of its products be liable for incidental or consequential damages arising from the use of any of its products. Any damages in connection with the use of any of Royal's products by the buyer, seller, user or any other person are strictly limited to the purchase price of the product only. Customer accepts full responsibility. All installation guidelines must be followed. Refer to literature or call 1-800-227-6181 for installation guidelines

 

©Copyright 2005-2014 Royal Adhesives & Sealants. All Rights Reserved.