About Us | Careers | History | News | Extranet | Contact Us | Home
  Assembly Adhesives
Epoxy & Urethane Adhesives
& Potting

Aerospace Sealants & Adhesives Adhesives & Coatings for Inflatable Structures Contact & Pressure Sensitive Adhesives Water-based Adhesives
& Coatings
Energy Cured Adhesives
& Coatings
Flooring Adhesives & Accessories Mirror
Mastics
Custom Packaging  
 
Markets Served
 
Extranet Sign-In
Username
Password

Clifton® Aircraft & Marine Inflatable Adhesives
Aircraft & Marine Inflatable Adhesives


Polyurethane Or PVC Inflatables:

Two part adhesives for manufacturing or major seam repair:

LA4009

A Two Part Adhesive For Bonding Vinyl Chloride And Urethane Coated Fabrics

LA 4009 adhesive has proven especially useful in the fabrication of inflated systems. It exhibits high initial bond strength and quickly cures to high strength, heat resistant final bond. Its solvent blend is especially compounded to minimize solvent attack on thin fabrics.

  • Polymer Base: Polyurethane
  • Flash Point: < 0 deg. F (TCC)
  • Color: Clear/slight yellow
  • Weight/Gallon: 7.2 +/- 0.2

More »


LA 4009EU

A Two Part Adhesive For Bonding Vinyl Chloride And Urethane Coated Fabrics

LA 4009EU has been formulated to be in compliance with the European regulation “Reach” which prohibits the use of Toluene. This is a Toluene free adhesive system that has proven to be especially useful in the fabrication of inflated systems made from either Polyurethane (PU) or Polyvinyl Chloride (PVC) coated fabrics. It exhibits high initial bond strength and quickly cures to high strength, heat resistant final bond. Its solvent blend is especially compounded to minimize solvent attack on thin fabrics.

  • Polymer Base: Polyurethane
  • Flash Point: < 0 deg. F (TCC)
  • Color: Clear/slight yellow
  • Weight/Gallon: 7.2 +/- 0.2

More »


LA 4009NOVOC

A Two Part Adhesive For Bonding Vinyl Chloride And Urethane Coated Fabrics

LA 4009NOVOC is a VOC free version of LA4009. This adhesive has proven especially useful in the fabrication of inflated systems. It exhibits high initial bond strength and quickly cures to high strength, heat resistant final bond. Its solvent blend is especially compounded to minimize solvent attack on thin fabrics.

  • Polymer Base:Polyurethane
  • Flash Point: < 0 deg. F (TCC)
  • Color: Clear/slight yellow
  • Weight/Gallon: 7.2 +/- 0.2

More »


UR 4980

This adhesive has proven useful in the fabrication of inflated systems. It exhibits high initial bond strength and quickly cures to a high strength heat resistant final bond. Its solvent blend is especially compound to minimize solvent attack on thin fabrics. This formula has been developed to minimize the discoloration of the glue line when exposed to the sun.

  • Polymer Base: Polyurethane
  • Flash Point: 15 deg. F. (TCC)
  • Color: Clear/slight yellow
  • Weight/Gallon:7.2 +/- .2 #/gal

More »


UR 4980EU

UR4980EU has been formulated to be in compliance with the European regulation “Reach” which prohibits the use of Toluene. This is a Toluene free adhesive system that has proven to be especially useful in the fabrication of inflated systems made from either Polyurethane (PU) or Polyvinyl Chloride (PVC) coated fabrics. It exhibits high initial bond strength and quickly cures to a high strength, heat resistant final bond. This formula has been developed to minimize the discoloration of the glue line when exposed to the sun.

  • Polymer Base: Polyurethane
  • Flash Point: 15 deg. F. (TCC)
  • Color: Clear/slight yellow
  • Weight/Gallon:7.2 +/- .2 #/gal

More »


UR 4980M1

UR4980M1 is an all Acetone version of UR4980 for use in the fabrication of Polyurethane or PVC inflated systems. It exhibits high initial bond strength and quickly cures to a high strength heat resistant final bond. Its solvent blend is especially compound to minimize solvent attack on thin fabrics. This formula has been developed to minimize the discoloration of the glue line when exposed to the sun.

  • Polymer Base: Polyurethane
  • Flash Point: 15 deg. F. (TCC)
  • Color: Clear/slight yellow
  • Weight/Gallon: 6.93 #’s/gal +/- .2 #’s

More »


One part adhesive for repair of PU or PVC:


LA 4123

Royal Adheisves & Sealants,LLC Aerospace & Marine inflatable Adhesives & Coatings Division developed LA 4123 as a modified contact adhesive for seaming vinyl membrane into environmental pond liners. This adhesive type is commonly called a bodied adhesive or solvent. When properly applied, tests show LA 4123 to provide peel adhesion values as high as 22 pounds on pond lining unsupported PVC. The bonded seam strengths are in compliance with NSD Standard Number 54, page 6, and table IA, which is a 10-pound minimum. Greater bond values are achieved on different substrates.

LA 4123 has also been used with great success in the inflatable industry for use as a repair adhesive. This product has excellent adhesion to Polyurethane and PVC coated fabrics. It is very user friendly based on the 3-5 minute open time it exhibits. Bond development is fast and this is the adhesive of choice among river rafters.

  • Polymer Base: Polyurethane
  • Flash Point: 4 deg. F (TCC)
  • Color: Clear/slight yellow
  • Weight/Gallon: 7.4 +/- 0.2 lbs

More »


CSM (Hypalon™) or Polychloroprene (Neoprene™) Inflatables:

Two part adhesives for manufacturing or major seam repair:

FA 4844

FA 4844 is a two-part, self-curing polychloroprene adhesive designed to bond coated fabrics and other materials. The excellent versatility of this adhesive makes it suitable for bonding synthetic rubber (Neoprene and Hypalon coated fabrics) and synthetic fabrics (nylon, dacron, rayon, etc.).

  • Polymer Base: Polychloroprene
  • Flash Point: < 0 deg. F (TCC)
  • Color: Neutral, Gray, Purple or Black
  • Weight/Gallon: 7.0-7.4 lbs.

More »


DB 7020

DB 7020 is a two-part polychloroprene based adhesive formulated to exhibit good adhesion to Neoprene, Hypalon, synthetic rubber foams, urethane foam, leather, and hard-to-adhere synthetic fabrics. This product demonstrates excellent peel adhesion and good heat resistance. DB 7020 is designed primarily for the use in bonding Hypalon/Neoprene coated fabrics as found in the inflatable industry.

  • Polymer Base: Polychloroprene
  • Flash Point: <0 deg. F. TCC
  • Color: Neutral
  • Weight/Gallon: 7.16 +/- 0.25 lbs.

More »


FA 1013

FA 1013 is a two-part, self-curing polychloroprene adhesive designed to bond coated fabrics and other materials. The excellent versatility of this adhesive makes it suitable for bonding synthetic rubber (Neoprene and Hypalon coated fabrics) and synthetic fabrics (nylon, dacron, rayon, etc.). FA 1013 conforms to MIL-A-5540B classes 4 & 5.

  • Polymer Base: Polychloroprene
  • Flash Point: -21.7 C, -7 deg. F
  • Color: Neutral
  • Weight/Gallon: 7.18 lbs

More »


FA 1030

FA 1030 is a one or two-part, self-curing polychloroprene adhesive designed to bond coated fabrics and other materials. The excellent versatility of this adhesive makes it suitable for bonding synthetic rubber (Neoprene and Hypalon coated fabrics) and synthetic fabrics (nylon, dacron, rayon, etc.). FA 1030 conforms to MIL-A-5540B type 1 and 4 (heat cure) and type 2, 3, and 5 (room temperature cure) and MIL-C-7800 (paragraph 3,3,1.2) type 1 and 4 (heat cure) do not require accelerator.

  • Polymer Base: Polychloroprene
  • Flash Point: -21.7deg. F, -7 deg F (TCC)
  • Color: Neutral or Black
  • Weight/Gallon: 7.2 +/- .25 lbs

More »


One part adhesive for repair of CSM (Hypalon™) and Polychloroprene (Neoprene™):


FA 1065

FA 1065 is recommended for the manufacture and repair of Neoprene inflatables and meets MIL-A-5540 B, Classes 1 to 5. This product is also used in the repair of Hypalon coated fabrics.

  • Polymer Base:Polychloroprene
  • Flash Point: < 20 deg. F (TCC)
  • Color: Neutral
  • Weight/Gallon: 6.9 lbs.

More »


COATINGS FOR INFLATABLES:


PC 2999 FR BRUSH

PC 2999 FR Brush viscosity is a two part aluminized, fire retardant, polychloroprene coating specifically designed for top coating Urethane coated slide fabrics.

  • Polymer Base: Polychloroprene
  • Flash Point: < 0 deg. F. (TCC)
  • Color: Aluminum
  • Weight/Gallon: Part A 8.46 lbs, Part B 9.54 lbs

More »


PC 5978WHT

PC 5978WHT is a chlorosulfonated polyethylene (CSM) based coating for factory and field painting of Polychloroprene or CSM (Hypalon) inflatables. The product comes in various colors with the basic ones being black, white, grey or blue.

  • Polymer Base: Chlorosulfonated polyethylene
  • Flash Point: 40 deg. F(TCC)
  • Color: White or specified
  • Weight/Gallon: 8.65 +/- 0.5

More »


 
Additional Information
Product Categories
 
 
Aircraft & Marine Inflatable Adhesives
Product
Effect of Freezing
Storage Life
Solvent Clean Up
Solvent Dilution
Solids
Viscosity
Recommended Storage Conditions
More
DB 7020
Reversible gel
6 mos
MEK
MEK
21 – 24 %
450 – 1,250 cps BROOKFIELD @ 20 RPM, 78F, #3 spindle
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
FA 1013
Reversible gel
12 mos
Toluol
Toluol
26 +/- 2%
1000 - 1500 cps Brookfield RVT/#4/20 RPM/ 78 F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
FA 1030
Reversible gel
12 mos
Toluene
Toluene
23 +/- 2%
800 – 1300 cps Brookfield RVT/#3/20 RPM/78 F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
FA 1065
Reversible gel
12 mos
Toluol
Toluol
25 % +/- 1%
1100 – 1300 cps Brookfield RVT/#3/20 RPM/78 F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
FA 4844
Reversible gel
Black - 6 months, Neutral – 12 months
Toluol
Toluol
22.5 +/- 1.5 %
800 – 1300 cps Brookfield RVT/#3/20 RPM/78 F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
LA 4009EU
Reversible gel
12 months Accelerator: 6 months
Ketone
Ketone
12.5 +/- 1%
600-1300 cps Brookfield RVT/#4/20 RPM/78 F
45-85 Deg. F. Keep out of direct sunlight.
more
LA 4009NOVOC
Reversible gel
12 mos Accelerator: 12 mos * Unopened containers
Ketone
Ketone
12.5 +/- 1%
700-1300 cps Brookfield RVT/#4/20 RPM/78 F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
LA 4123
Reversible gel
12 months
MEK
THF
10% +/- 1%
200-600 cps Brookfield RVT/#2/20 RPM/78 F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
LA4009
Reversible gel
12 months*
Ketone
Ketone
12.5 +/- 1%
900-1300 cps Brookfield RVT/#4/20 RPM/78 F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
PC 2999 FR Brush
Reversible gel
6 mos
Toluol, Xylene
Toluol, Xylene
PT A 35 +/- 2%
Part A (Base): 550-1300 cps, Brookfield, RVT, # 2 spindle, 20 rpm, 78F
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
PC 5978WHT
Reversible gel
9 months
Toluene or Xylene
Toluene
30-34%
2,000-3,000 cps
45-85 Deg. F. Keep out of direct sunlight. Mix well before use.
more
UR 4980
Reversible gel
12 months
Ketone (MEK/Acetone)
Ketone (MEK/Acetone)
13% +/- 1
800-1300 cps Brookfield RVT/#4/20 RPM/78 F
more
UR 4980EU
Reversible gel
12 months
Ketone (MEK/Acetone)
Ketone (MEK/Acetone)
13% +/- 1
600-1300 cps Brookfield RVT/#4/20 RPM/78 F
more
UR 4980M1
Reversible gel
12 months
Ketone (MEK/Acetone)
Ketone (MEK/Acetone)
11.5-14.5%
600-1300 cps Brookfield RVT/#4/20 RPM/78 F
more
             

Under no circumstance will Royal Adhesives & Sealants LLC. or its subsidiaries, the manufacturer, or the seller of its products be liable for incidental or consequential damages arising from the use of any of its products. Any damages in connection with the use of any of Royal's products by the buyer, seller, user or any other person are strictly limited to the purchase price of the product only. Customer accepts full responsibility. All installation guidelines must be followed. Refer to literature or call 574-246-5000 for installation guidelines.

 

©Copyright 2005-2014 Royal Adhesives & Sealants. All Rights Reserved.