Above and Beyond Insulation Adhesives
When it comes to commercial roofing projects, contractors want adhesives that are easy to apply and always perform as advertized. Millennium One Step™ Foamable Insulation Adhesive changed the way contractors approach low slope roofing projects. With true all-temperature performance, the ability to set insulation immediately without waiting for foam to rise, a consistently fast lock-down time, and a high-body formula that makes application over rough surfaces such as gravel surfaced built-up roofing easy, Millennium One Step™ is truly in a class above all other insulation adhesives. Going one step further, applying Millennium One Step™ through the patented One Step™ Multi Bead Plus Applicators assures prescriptive adhesive bead spacing and is the fastest way to install insulation.
Beyond Millennium One Step™ Foamable Adhesive Royal Adhesives & Sealants offers insulation adhesives based in rapidly renewable, bio-based raw materials, pump grade adhesives, low-rise foam adhesives for fleeceback membrane attachment, and contractor preferred, durable application equipment. The entire family of Royal’s low-rise foam insulation adhesives are essentially VOC-free and eliminate the rooftop thermal bridging caused by mechanical fasteners.
Millennium One Step™ Foamable Insulation Adhesive
Millennium One Step™ Foamable Insulation Adhesive is a 2-part, essentially VOC free low rise foam insulation adhesive. One Step™ is a true all-weather formula that can be applied in freezing temperatures as well as hot and humid climates. Utilizing the Patented MBA Plus, there is no faster way to install rooftop insulation adhesive.
Millennium One Step Green® Foamable Adhesive
Millennium One Step Green® Foamable Adhesive is an essentially VOC free, low rise foam insulation adhesive manufactured with an industry-leading 45% rapidly renewable content. The product has an extensive list of approved FM assemblies.
Millennium PG-1 Low Viscosity Insulation Adhesive
Millennium PG-1 Low Viscosity Insulation Adhesive is a 2-part essentially VOC free, low rise polyurethane foam adhesive designed for adhering rigid insulation boards to a roof's structural deck. Useful in VOC regulated markets, PG-1 is applied through the Cyclone Low Pressure Pump Cart.
Millennium PG-1 SAF Pump Grade Adhesive
Millennium PG-1 SAF Pump Grade Adhesive is a uniquely formulated version of PG-1 Adhesive that is free of amines and siloxanes. PG-1 SAF was designed for ultra sensitive roofing applications such as electronics and computer chip fabrication facilities.
Millennium PG-1 Fleeceback Membrane Adhesive
Millennium PG-1 Fleeceback Membrane Adhesive is a 2-part, essentially VOC free, low rise polyurethane foam adhesive designed for fleeceback single ply membrane installation. PG-1 also finds use as an insulation adhesive.
Millennium Universal Primer
Millennium Universal Primer is a waterbased primer designed to bind fine particulate matter such as dust on a gravel surfaced built-up roof or asphalt particles on a crazed or "alligatored" roof. Universal Primer prepares the roof surface to accept the Millennium family of low rise foam adhesives.
Millennium Surface Treatment
Millennium Surface Treatment is a solvent spray used to etch the surface of fresh (unoxidized) asphalt roof or smooth film plastic modified bitumen roofing. Surface Treatment prepares difficult-to-adhere-to surfaces to accept the Millennium family of low rise foam adhesives.
Patented One Step™ Multi-Bead Applicator
Patented One Step™ Multi-Bead Applicator is an exceptionally durable cordless dispensing solution for insulation adhesives packaged in 1.5L dual cartridges. The applicator holds 4 cartridges and applies 12 inch on-center prescriptive bead placement.
Patented One Step™ Multi-Bead Applicator Plus
Patented One Step™ Multi-Bead Applicator Plus is a durable, battery driven, cordless dispensing solution for insulation adhesives packaged in 1.5L dual cartridges. The applicator holds up to 13 cartridges and allows for 3, 6, and 12 inch on-center prescriptive bead placement.
Millennium One Step™ Battery Powered Applicator
Millennium One Step™ Battery Powered Applicator is a durable, cordless, contractor preferred, dual cartridge adhesive applicator. The unique carriage design allows for upright application eliminating back strain. The tool comes with a charger and 2 rechargeable NiMH batteries.
Millennium One Step™ Pneumatic Applicator
Millennium One Step™ Pneumatic Applicator is a durable, dual cartridge adhesive dispenser. Easy-to-use, this tool can provide up to 1,500 pounds of thrust utilizing a standard air compressor.
Millennium Cyclone Low Pressure Pump Cart
Patented Millennium Cyclone Low Pressure Pump Cart* manufactured by Garlock is designed for the rooftop dispense of 1:1 ratio urethane adhesives. Useful for both insulation and membrane adhesives, the Cyclone can be used with all brands of compatible 2-part foaming urethane adhesives.
*US Patent Nos: 9174234B2; 9573150; 9566594
Millennium Cyclone System Solution
Millennium Cyclone System Solution is a specially formulated flush solution designed to prepare a Cyclone Low Pressure Pump Cart for long term storage or for general cleaning of the pumps, hoses, and manifolds.
Millennium Ultra Drive & Heavy Duty Manual Applicators
Millennium Ultra Drive & Heavy Duty Manual Applicators are designed to dispense 2-part foaming insulation adhesives. The single piston drive design eliminates the possibility of off-ratio application.