Improving upon the Installation of Reflective TPO Singly Ply Roofing
In the fast-growing Thermoplastic Olefin (TPO) roofing market, Royal Adhesives & Sealants makes it easy to install single ply sheets with adhesive tapes and laminates specifically designed to complement energy-saving white roofing membranes. Products like Cool Cover™ roofing tape are based on a vulcanized white rubber adhesive. The tape is perfect for splicing TPO membrane roofing with pressure sensitive technology that ensures high strength and water-tight assemblies. White reflective roofing tapes developed at Royal are among the most widely used pressure sensitive TPO accessories available today.
This technology, in combination with VOC-compliant edge caulks and primers, represent Royal’s commitment to the development of innovative adhesives, tapes and sealants that meet the demands of today’s rapidly expanding reflective single ply roofing market.
Cool Cover™ TPO Seam Tape
Cool Cover™ TPO Seam Tape is a white vulcanized rubber pressure sensitive tape designed to provide high-strength, watertight seams for TPO single ply roofing membranes. This tape provides OEM quality performance for TPO single ply restoration projects.
Cool Cover™ TPO Cover Tape
Cool Cover™ TPO Cover Tape is a TPO membrane laminated to a vulcanized, high-strength pressure sensitive tape. This product is suitable for metal edge tie-ins, covering batten bars and termination bars as well as seam repairs in high traffic areas. The product is available in white, gray and tan.
Cool Cover™ Reinforced Perimeter Strip
Cool Cover™ Reinforced Perimeter Strip is designed to secure TPO field membranes at the transition from the horizontal surface to the vertical wall and prevent bridging of the field membrane. The product consists of a 6 inch wide reinforced TPO membrane laminated to a 3 inch wide vulcanized rubber pressure sensitive tape.
Millennium Single Ply Primer
Millennium Single Ply Primer is a rubber based primer with a high viscosity that resists running and thus finds use on both horizontal and vertical surfaces. The primer can be used on both EPDM and TPO membranes and is perfect for installing Cool Cover™ TPO Tapes or Millennium EPDM Tapes.
Millennium Primer 240
Millennium Primer 240 is a VOC compliant version of Millennium Single Ply Primer. Useful for installing both Cool Cover TPO and Millennium EPDM Roofing Accessories, the primer can be used in VOC regulated markets such as CA or the OTC States.
Cool Cover™ TPO Edge Sealant
Cool Cover™ TPO Edge Sealant is a high solids sealant designed to seal the exposed edges of TPO membrane splices, T-joint patches, termination bars, and general flashing applications. The product is highly UV resistant, will not shrink or crack, and can be used in VOC regulated markets such as CA and the OTC States.
Millennium Term Bar Tape
Millennium Term Bar Tape is a permanently flexible butyl tape used underneath a TPO waterproofing membrane where a termination bar will be installed. The product is easy to use and provides a cleaner application when compared to pumpable sealants.
EternaBond® RoofSeal™ White / Gray / Tan
EternaBond® RoofSeal™ is the number one name in semi-permanent repair tapes. Great for emergency waterproofing of TPO single ply roofs, EternaBond® RoofSeal™ comes in a variety of colors to match your TPO membrane, as well as a variety of widths, from 2 inches all the way to 4 foot wide sheets.
Cool Cover™ TPO Cover Tape-Safety Yellow
Cool Cover™ TPO Cover Tape-Safety Yellow is designed to cover, protect, and seal mechanical fastening bars, membrane fasteners, core sample repair patches, membrane repairs, and seam overlays in all TPO roofing systems. The product provides a clearly visible indicator of the roof edge, elevation changes and designated walk or no-walk areas.
Millennium Water Block Mastic
Millennium Water Block Mastic (also known as ElastiSeal® BP-300) is a gray colored, low VOC, permanently flexible mastic sealant. The sealant has various uses including water block, termination bars, roof panel ribs, and for installing vapor barriers. It is not intended for application as a structural adhesive.
Millennium Lockin' Pocket® Sealing Systems
Millennium Lockin' Pocket® Sealing Systems are roof penetration sealing systems consisting of a pre-fabricated inter-locking pocket that is sealed with fast setting, solvent free, Millennium Hurricane Force® Universal Sealer Extreme. They are much faster to install than conventional pitch pocket sealing systems. Pockets are available in octagon, square, and u-build configurations.
Millennium Hurricane Force® Universal Sealer Extreme
Millennium Hurricane Force® Universal Sealer is a fast setting, solvent free, multi-use sealer that becomes waterproof within minutes of application. The formula is essentially VOC free. The product finds use in filling penetration sealing systems including Millennium Lockin' Pocket® Sealing Systems.
Millennium One Step™ Night Seal®
Millennium One Step™ Night Seal® is a highly elastomeric, solvent free quick setting foam sealer. It is designed for use as a quick, easy, and reliable sealer for temporary tie-ins on reroofing projects.
Millennium PG-1 Fleeceback Membrane Adhesive
Millennium PG-1 Fleeceback Membrane Adhesive is a 2-part, essentially VOC free, low rise polyurethane foam adhesives designed for fleeceback single ply membrane installation. PG-1 also finds use as an insulation adhesive.
Millennium Cyclone Low Pressure Pump Cart
Patented Millennium Cyclone Low Pressure Pump Cart* manufactured by Garlock is designed for the rooftop dispense of 1:1 ratio urethane adhesives. Useful for both insulation and membrane adhesives, the Cyclone can be used with all brands of compatible 2-part foaming urethane adhesives.
*US Patent Nos: 9174234B2; 9573150; 9566594
Millennium Cyclone System Solution
Millennium Cyclone System Solution is a specially formulated flush solution designed to prepare a Cyclone Low Pressure Pump Cart for long term storage or for general cleaning of the pumps, hoses, and manifolds.
Patented One Step™ Multi-Bead Applicator Plus
Patented One Step™ Multi-Bead Applicator Plus is a durable, battery driven, cordless dispensing solution for insulation adhesives packaged in 1.5L dual cartridges. The applicator holds up to 13 cartridges and allows for 3, 6, and 12 inch on-center prescriptive bead placement.
Millennium One Step™ Battery Powered Applicator
Millennium One Step™ Battery Powered Applicator is a durable, cordless, contractor preferred, dual cartridge adhesive applicator. The unique carriage design allows for upright application eliminating back strain. The tool comes with a charger and 2 rechargeable NiMH batteries.
Millennium One Step™ Pneumatic Applicator
Millennium One Step™ Pneumatic Applicator is a durable, dual cartridge adhesive dispenser. Easy-to-use, this tool can provide up to 1,500 pounds of thrust utilizing a standard air compressor.