EPDM Accessories from the Company that Invented Them
In the late 1980’s Royal’s chemists were hard at work inventing a high-strength, vulcanized rubber tape for seaming EPDM that was awarded a U.S. patent in 1993. EPDM seam tape revolutionized the single ply roofing industry by providing an easy-to-install, permanent, and reliable seam. As the industry standard in commercial EPDM seaming, flashing, and detail work, Royal’s technology has been used on over one billion square feet of EPDM seams and flashings over the past three decades.
Today Royal Adhesives & Sealants offers a full line of EPDM waterproofing tapes, flashings, and sealants that provide OEM quality for non-warranted roof repairs. Royal’s Millennium EPDM Accessories are the Industry’s trusted choice for EPDM restoration projects.
Millennium EPDM Seam Tape
Millennium EPDM Seam Tape is a vulcanized rubber pressure sensitive tape designed to provide high-strength, watertight seams for EPDM single ply roofing membranes. This tape provides OEM quality performance when used in EPDM single-ply restoration projects.
Millennium EPDM Flashing Tape
Millennium EPDM Flashing Tape is an uncured EPDM membrane laminated to a vulcanized, high-strength EPDM pressure sensitive tape. The flashing tape is extremely flexible and can be formed to fit irregular shapes and elevation changes.
Millennium EPDM Semi-Cured Cover Tape
Millennium EPDM Semi-Cured Cover Tape is a semi-cured EPDM membrane laminated to a vulcanized, high-strength EPDM pressure sensitive tape. Tougher than flashing tape, this product is suitable for covering batten bars and termination bars as well as seam repairs in high traffic areas.
Millennium Reinforced Perimeter Strip
Millennium Reinforced Perimeter Strip is designed to secure EPDM field membranes at the transition from the horizontal surface to the vertical wall and prevent bridging of the field membrane. The product consists of a 6 inch wide reinforced EPDM membrane laminated to a 3 inch wide vulcanized rubber pressure sensitive tape.
Millennium EPDM T-joint Covers
Millennium EPDM T-joint Covers are pre-cut laminates of EPDM flashing designed for use in sealing a field membrane T-joint. The product saves time when repairing an EPDM membrane roof.
Millennium EPDM Corner Flashing
Millennium EPDM Corner Flashing are pre-cut laminates of EPDM flashing designed for flashing outside and inside corners. The product saves time when repairing an EPDM membrane roof.
Millennium Single Ply Primer
Millennium Single Ply Primer is a rubber based primer with a high viscosity that resists running and thus finds use on both horizontal and vertical surfaces. The primer can be used on both EPDM and TPO membranes and is perfect for installing Millennium EPDM Tapes or Cool Cover™ TPO Tapes.
Millennium Primer 240
Millennium Primer 240 is a VOC compliant version of Millennium Single Ply Primer. Useful for installing both Millennium EPDM and Cool Cover™ TPO Roofing Accessories, the primer can be used in VOC regulated markets such as CA or the OTC States.
Millennium EPDM Edge Sealant
Millennium EPDM Edge Sealant is a high solids EPDM based sealant designed to seal the exposed edges of EPDM membrane splices, T-joint patches, termination bars, and general flashing applications. The product is highly UV resistant, will not shrink or crack, and can be used in VOC regulated markets such as CA and the OTC States.
Millennium Term Bar Tape
Millennium Term Bar Tape is a permanently flexible butyl tape used underneath an EPDM waterproofing membrane where a termination bar will be installed. The product is easy to use and provides a cleaner application when compared to pumpable sealants.
Millennium Water Block Mastic
Millennium Water Block Mastic (also known as ElastiSeal® BP-300) is a gray colored, low VOC, permanently flexible mastic sealant. The sealant has various uses including water block, termination bars, roof panel ribs, and for installing vapor barriers. It is not intended for application as a structural adhesive.
EternaBond® RoofSeal™ Black
EternaBond® RoofSeal™ Black is the number one name in semi-permanent repair tape. Great for emergency waterproofing of EPDM single ply roofs, EternaBond® RoofSeal™ Black comes in a variety of widths, from 2 inches all the way to 4 foot wide sheets.
Millennium Lockin' Pocket® Sealing Systems
Millennium Lockin' Pocket® Sealing Systems are roof penetration sealing systems consisting of a pre-fabricated inter-locking pocket that is sealed with fast setting, solvent free, Millennium Hurricane Force® Universal Sealer Extreme. They are much faster to install than conventional pitch pocket sealing systems. Pockets are available in octagon, square, and u-build configurations.
Millennium Hurricane Force® Universal Sealer Extreme
Millennium Hurricane Force® Universal Sealer Extreme is a fast setting, solvent free, multi-use sealer that becomes waterproof within minutes of application. The formula is essentially VOC free. The product finds use in filling penetration sealing systems including Millennium Lockin' Pocket® Sealing Systems.
Millennium One Step™ Night Seal®
Millennium One Step™ Night Seal® is a highly elastomeric, solvent free quick setting foam sealer. It is designed for use as a quick, easy, and reliable sealer for temporary tie-ins on reroofing projects.
Millennium PG-1 Fleeceback Membrane Adhesive
Millennium PG-1 Fleeceback Membrane Adhesive is a 2-part, essentially VOC free, low rise polyurethane foam adhesives designed for fleeceback single-ply membrane installation. PG-1 also finds use as an insulation adhesive.
Millennium Cyclone Low Pressure Pump Cart
Patented Millennium Cyclone Low Pressure Pump Cart* manufactured by Garlock is designed for the rooftop dispense of 1:1 ratio urethane adhesives. Useful for both insulation and membrane adhesives, the Cyclone can be used with all brands of compatible 2-part foaming urethane adhesives.
*US Patent Nos: 9174234B2; 9573150; 9566594
Millennium Cyclone System Solution
Millennium Cyclone System Solution is a specially formulated flush solution designed to prepare a Cyclone Low Pressure Pump Cart for long term storage or for general cleaning of the pumps, hoses, and manifolds.
Patented One Step™ Multi-Bead Applicator Plus
Patented One Step™ Multi-Bead Applicator Plus is a durable, battery driven, cordless dispensing solution for insulation adhesives packaged in 1.5L dual cartridges. The applicator holds up to 13 cartridges and allows for 3, 6, and 12 inch on-center prescriptive bead placement.
Millennium One Step™ Battery Powered Applicator
Millennium One Step™ Battery Powered Applicator is a durable, cordless, contractor preferred, dual cartridge adhesive applicator. The unique carriage design allows for upright application eliminating back strain. The tool comes with a charger and 2 rechargeable NiMH batteries.
Millennium One Step™ Pneumatic Applicator
Millennium One Step™ Pneumatic Applicator is a durable, dual cartridge adhesive dispenser. Easy-to-use, this tool can provide up to 1,500 pounds of thrust utilizing a standard air compressor.