About Us | Careers | History | News | Extranet | Contact Us | Home
  Assembly Adhesives
Epoxy & Urethane Adhesives
& Potting

Aerospace Sealants & Adhesives Adhesives & Coatings for Inflatable Structures Contact & Pressure Sensitive Adhesives Water-based Adhesives
& Coatings
Energy Cured Adhesives
& Coatings
Flooring Adhesives & Accessories Mirror
Mastics
Custom Packaging  
 
Markets Served
 
Extranet Sign-In
Username
Password

Extreme® Assembly Adhesives
PVC Window - Mull & Key Adhesives


Extreme Adhesives offers a product line of Structural MMA materials specifically formulated for use with PVC and aluminum window assemblies. Our PVC Window Assembly systems permit you to build and mull windows with a permanent, truly structural adhesive. These solvent and silicone free, bright white products offer a variety of cure speeds, gap filling ability to 3/8”, complete weather resistance, and bond equally well to PVC, aluminum or fiberglass surfaces. No surface preparation is required and the appearance and performance of the joint is not degraded by unsightly fasteners or unnecessary penetrations.

PVC Window Fast Cure

PVC Window Fast Cure is a two component, 100% solids, methyl methacrylate adhesives designed for use with PVC, Aluminum and many other substrates. The Fast Cure has an open time of approximately 4-6 minutes and will develop handling strength in less than 18 minutes. All EXTREME Window Systems Adhesives demonstrate strengths up to 3,400 psi, making them often stronger than the substrates they are bonding. These adhesives are of a creamy non-sag consistency, and they won’t foam, run, or drip. For more information please see our Technical Data Sheet.

  • Application Temp: 25F to 100F
  • Work Time (Minutes): 4 to 5
  • Color: Bright White
  • Viscosity: Medium / Creamy
  • Elongation: Moderate
  • Mix Ratio by Volume: 1:1

Packaging: 50ml, 220ml, 400ml, 5 gallon pail

More »


PVC Window Intermediate Cure

PVC Window Intermediate Cure is a two component, 100% solids, methyl methacrylate adhesives designed for use with PVC, Aluminum and many other substrates. The Intermediate Cure has an open time of approximately 10-12 minutes and will develop handling strength in less than 27 minutes. All EXTREME Window Systems Adhesives demonstrate strengths up to 3,400 psi, making them often stronger than the substrates they are bonding. These adhesives are of a creamy non-sag consistency, and they won’t foam, run, or drip. For more information please see our Technical Data Sheet.

  • Application Temp: 35F to 100F
  • Work Time (Minutes): 10 to 12
  • Color: Bright White
  • Viscosity: Medium / Creamy
  • Elongation: Moderate
  • Mix Ratio by Volume: 1:1

Packaging: 50ml, 220ml, 400ml, 5 gallon pail

More »


PVC Window Slow Cure

PVC Window Slow Cure is a two component, 100% solids, methyl methacrylate adhesives designed for use with PVC, Aluminum and many other substrates. The Fast Cure has an open time of approximately 20-25 minutes and will develop handling strength in less than 90 minutes. All EXTREME Window Systems Adhesives demonstrate strengths up to 3,400 psi, making them often stronger than the substrates they are bonding. These adhesives are of a creamy non-sag consistency, and they won’t foam, run, or drip. For more information please see our Technical Data Sheet.

  • Application Temp: 45F to 115F
  • Work Time (Minutes): 20 to 25
  • Color: Bright White
  • Viscosity: Medium / Creamy
  • Elongation: Moderate
  • Mix Ratio by Volume: 1:1

Packaging: 50ml, 220ml, 400ml, 5 gallon pail

More »


 
Additional Information
Product Categories
 
 
PVC Window - Mull & Key Adhesives
Product
Strength Begins Minutes
Tensile Shear Strength (AL)
Impact Strength (Steel)
Peel Strength
Service Temperature
Hardness
Best For
More
PVC Window Fast Cure
15 to 25
3300 psi
20 ft/lbs
25 pli
-65 F to +260 F
75 Shore D
Plastics, Composites, Metals
more
PVC Window Intermediate Cure
45 to 60
3300 psi
20 ft/lbs
25 pli
-65 F to +260 F
75 Shore D
Plastics, Composites, Metals
more
PVC Window Slow Cure
20 to 25
3300 psi
20 ft/lbs
25 pli
-65 F to +260 F
75 Shore D
Plastics, Composites, Metals
more
             

Under no circumstance will Royal Adhesives & Sealants LLC. or its subsidiaries, the manufacturer, or the seller of its products be liable for incidental or consequential damages arising from the use of any of its products. Any damages in connection with the use of any of Royal's products by the buyer, seller, user or any other person are strictly limited to the purchase price of the product only. Customer accepts full responsibility. All installation guidelines must be followed. Refer to literature or call 574-246-5000 for installation guidelines.

 

©Copyright 2005-2014 Royal Adhesives & Sealants. All Rights Reserved.