About Us | Careers | History | News | Extranet | Contact Us | Home
  Assembly Adhesives
Epoxy & Urethane Adhesives
& Potting

Aerospace Sealants & Adhesives Adhesives & Coatings for Inflatable Structures Contact & Pressure Sensitive Adhesives Water-based Adhesives
& Coatings
Energy Cured Adhesives
& Coatings
Flooring Adhesives & Accessories Mirror
Mastics
Custom Packaging  
 
Markets Served
 
Extranet Sign-In
Username
Password

Extreme® Assembly Adhesives
Epoxies - Best for wood, masonry, stone, and metals


Available in two-part or one-part, both room temperature and heat curable formulations, epoxy adhesives provide high strength bonds on a wide variety of substrates. The bond can often times be stronger than the parts being bonded. Epoxies are very tough with good chemical and environmental resistance. They are also available with electrically and thermally conductive properties.

Epoxy Adhesives work well on many woods, masonry, stone and metals. Slower curing products are usually stronger and more durable. RT cure epoxies offer only low to moderate strength on most plastics.


EXT - FS Red

Two component epoxy is fast setting with an approximate working time of 3 minutes and handling strength in less than 30 minutes. It has a non-sag mixed viscosity that makes it excellent for vertical or overhead repairs. Bonds well to most metals, some plastics, as well as wood, stone, ceramics, leather and many other substrates. For more information please see our Technical Data Sheet.

  • Work Time Minutes: 3
  • Color: White
  • Viscosity: Gel
  • Chemistry: Epoxy
  • Mix Ratio by Volume: -

Packaging: Double Bubble, 25ml, 50ml, 220ml, 400ml, 5 gallon pail kit.

More »


EXT - EFS Red

Two component epoxy is fast setting with an approximate working time of 3 minutes and handling strength in less than 30 minutes. It has a non-sag mixed viscosity that makes it excellent for vertical or overhead repairs. Bonds well to most metals, some plastics, as well as wood, stone, ceramics, leather and many other substrates. What makes this system unique is the ability to cure in low temperature environments (down to -18 degrees C). For more information please see our Technical Data Sheet.

  • Work Time Minutes: 3
  • Color: Amber
  • Viscosity: Low
  • Chemistry: Epoxy
  • Mix Ratio by Volume: -

Packaging: Double Bubble, 25ml, 50ml, 220ml, 400ml, 5 gallon pail kit.

More »


EXT - EFSD Silver

Two component highly durable epoxy is fast setting with an approximate working time of 5 minutes and handling strength in less than 60 minutes. What makes this system unique is the ability to cure in very low temperature environments (down to -30 degrees C) as well as its improved toughness and high impact resistance. Bonds well to most metals, some plastics, as well as wood, stone, ceramics, leather and many other substrates. For more information please see our Technical Data Sheet.

  • Work Time Minutes: 5
  • Color: Amber
  • Viscosity: Very Low
  • Chemistry: Epoxy
  • Mix Ratio by Volume: -

Packaging: Double Bubble, 25ml, 50ml, 220ml, 400ml, 5 gallon pail kit.

More »


EXT - GP Blue

Two component General Purpose epoxy has an approximate working time of 2 hours and will develop handling strength in approximately 8 hours. What makes this system unique is the ability to cure in extreme temperature environments (down to -34 degrees C and up to 71 degrees C) without impacting cure times or product performance. Bonds well to most metals, some plastics, as well as wood, stone, ceramics, leather and many other substrates. For more information please see our Technical Data Sheet.

  • Work Time Minutes: 120
  • Color: Amber
  • Viscosity: Medium
  • Chemistry: Epoxy
  • Mix Ratio by Volume: -

Packaging: Double Bubble, 25ml, 50ml, 220ml, 400ml, 5 gallon pail kit.

More »


EXT - 2115

Extreme 2115 is a clear, low viscosity epoxy formulation used in the fabrication of lasers. It is capable of withstanding 30 seconds of 60 watt direct laser energy. The low cure shrinkage (using a room temperature cure) makes this product an excellent choice for bonding optical components where alignment accuracy is essential. For more information please see our Technical Data Sheet.

  • Work Time Minutes: 120
  • Color: Clear
  • Viscosity: Low 250 cps
  • Chemistry: Epoxy
  • Mix Ratio by Volume: 10:3 (By Weight), NASA Outgas Approved

Packaging: 2.5 gram.

More »


 
Additional Information
Product Categories
 
 
Epoxies - Best for wood, masonry, stone, and metals
Product
Room Temp Cure
Strength Development
Tensile Shear Strength (AL)
Impact Strength (Steel)
Peel Strength
Service Temperature
Hardness
Best For
More
EXT - EFS Red
Yes
15 - 30 Minutes
3000 psi
Low
Low
-22F to +180F
80 Shore D
Glass, Metals, Masonry
more
EXT - EFSD Silver
Yes
45 - 60 Minutes
4500 psi
Low
Low
-22F to +180F
80 Shore D
Glass, Metals, Masonry
more
EXT - FS Red
Yes
15 - 30 Minutes
3712 psi
Low
Low
-22F to +180F
83 Shore D
Glass, Metals, Masonry
more
EXT - GP Blue
Yes
8 Hours
3280 psi
Moderate
Low
-30F to +200F
80 Shore D
Glass, Metals, Masonry
more
EXT - ORANGE
Yes
-
-
-
-
-
-
Glass, Metals, Masonry
more
EXT-2115
Optional
4 hrs
3800 psi
Low
Low
-94F to 212F
78 Shore D
Laminating Glass / Rigid Plastics
more
             

Under no circumstance will Royal Adhesives & Sealants LLC. or its subsidiaries, the manufacturer, or the seller of its products be liable for incidental or consequential damages arising from the use of any of its products. Any damages in connection with the use of any of Royal's products by the buyer, seller, user or any other person are strictly limited to the purchase price of the product only. Customer accepts full responsibility. All installation guidelines must be followed. Refer to literature or call 574-246-5000 for installation guidelines.

 

©Copyright 2005-2014 Royal Adhesives & Sealants. All Rights Reserved.