
Best for fast bonds on most rubbers, plastics, and metals. Bond wood and MDF with Fast Tack Accelerator. Cyanoacrylate (Super Glue) Adhesives work well on a variety of substrates and often best for many rubbers and plastics. They should not be used on glass. They work well on wood and MDF with Accelerator. Specialty Cyanoacrylates including surface insensitive and non blooming varieties are available for difficult to bond materials.
Best for fast bonds on most rubbers, plastics, and metals. Bond wood and MDF with Fast Tack Accelerator. Cyanoacrylate (Super Glue) Adhesives work well on a variety of substrates and often best for many rubbers and plastics. They should not be used on glass. They work well on wood and MDF with Accelerator. Specialty Cyanoacrylates including surface insensitive and non blooming varieties are available for difficult to bond materials.
EXT-1002
Fast Setting, wicking grade adhesive. Outstanding resistance to aging, weathering, and
- Work Time (Seconds): < 2
- Color: Clear
- Viscosity: Very low - 2 cps
- Chemistry: Ethyl
- Mix Ratio by Volume: NA
Packaging: 2 oz. bottle.
More »
EXT-1010
USP Class VI Approvable. Low to medium viscosity is ideal for small gap filling.
- Work Time (Seconds): < 8
- Color: Clear
- Viscosity: Low - 100 cps
- Chemistry: Ethyl
- Mix Ratio by Volume: NA
Packaging: 2 oz. bottle.
More »
EXT-1025
USP Class VI Approvable. Excellent flexibility ideal for bonding porous substrates such as foam, rubber, and wood.
- Work Time (Seconds): < 10
- Color: Clear
- Viscosity: Medium - 250 cps
- Chemistry: Ethyl
- Mix Ratio by Volume: NA
Packaging: 2 oz. bottle.
More »
EXT-1050
This Cyanoacrylate (CA) adhesive is a fast setting, medium viscosity adhesive for general purpose use. It has a viscosity that creates outstanding gap filling and flow characteristics while allowing repositioning time. It is 100% solids formulation for VOC compliance and meets the requirements of Military Specifications Mil-A-46050C. Set Times are Metal / Metal 30 seconds, Plastic / Plastic 8 seconds, Rubber / Rubber 10 seconds. For more information, please see our technical data sheet.
- Work Time (Seconds): < 10
- Color: Clear
- Viscosity: Medium - 500 cps
- Chemistry: Ethyl
- Mix Ratio by Volume: NA
Packaging: 2oz bottle and 1 lb bottle.
More »
EXT-766 (Toughened)
High Temperature – 65° to 280°F. Rubber toughened to provide some flexibility. Designed for difficult to bond substrates.
- Work Time (Seconds): < 10
- Color: Clear
- Viscosity: High - 2500 cps
- Chemistry: Ethyl
- Mix Ratio by Volume: NA
Packaging: 2 oz. bottle.
More »
EXT-CA Gel (Thixotropic)
Slow Setting, gap filling. Ideal for vertical and horizontal applications.
- Work Time (Seconds): 30
- Color: Clear
- Viscosity: High - GEL
- Chemistry: Ethyl
- Mix Ratio by Volume: NA
Packaging: 20 gram tube.
More »
EXT-9001
Heptane Based Accelelerator.
Packaging: 2 oz. bottle.
More »
EXTREME Extra-Tack H Fast Accelerator
This CA accelerator enhances the curing of EXTREME Cyanoacrylates where low humidity levels or surface acidity may exist. This product is also used for fillet conditions or when gap filling between substrates. It can be pre-applied to the opposite surface from the adhesive or post applied to the adhesive joint by brush, pump sprayer, or dropper. For more information please see our Technical Data Sheet.
- Use to accelerate the curing of Cyanoacrylate Adhesives or for use on porous materials such as wood.
Packaging: 2oz (spray or brush) and 1 lbs bottles.
More »
EXT-9010 Poly Plus Primer
Poly Plus Based Primer. Strengthens the adhesion of Extreme cyanoacrylate adhesives to non-polar plastics such as polypropylene and polyethylene plastics.
- Use to improve the performance of EXTREME cyanoacrylate adhesives when bonding polyethylene, polypropylen, Teflon, and silicone rubber.
Packaging: 2 oz. bottle.
More »